Contractors & home services

Stop Chasing Checks. Collect Payment the Second the Job Is Finished.

Built for HVAC technicians, plumbers, electricians, roofers, and trade pros nationwide who are tired of waiting thirty days to get paid for work completed this afternoon.

What is credit card processing for contractors?

Credit card processing for contractors lets you take cards and text-to-pay links on the job, on an invoice or before work starts. The right account is approved for your deposit and ticket sizes, and it lets you offset fees with dual pricing, so a large install doesn’t eat your margin.

Electrician installing wiring on a job site
Collect payment on the jobsite instead of waiting weeks for a check.

How It Works On The Jobsite

  1. Finish the work: Pack up your tools while the homeowner inspects the finished job.
  2. Text a pay link in 10 seconds: Type the ticket amount into your phone or mobile terminal and send a secure SMS link directly to the customer.
  3. Get paid before the truck starts: The customer taps the link on their smartphone, approves the charge with Apple Pay or their credit card, and funds deposit directly to your bank account as soon as the next morning.
  4. Never eat the card fee: Automatic dual pricing passes the processing cost through to the cardholder, so you keep 100% of your labor and materials markup.

Get paid on the jobsite, not net-30

When you finish an install and tell the homeowner “I’ll mail you an invoice,” you quietly become an interest-free bank. You bought the copper. You bought the condenser. You paid your crew on Friday. Now you’re waiting 30, 45, sometimes 60 days for a check that’s “in the mail,” while your supplier’s bill comes due in ten.

That gap is the single most expensive habit in the trades, and it has nothing to do with how good your work is. It’s a payment problem, and it has a payment fix.

The 30-day float costs more than you think

Every open invoice is your money sitting in someone else’s account. It’s working capital you can’t put toward the next job, a credit line you’re paying interest on to cover materials, and office time spent making reminder calls and re-sending invoices. Waiting also creates risk: the longer an invoice sits, the more likely it turns into a dispute, a partial payment or a write-off. A homeowner who was thrilled with the work on Tuesday is a lot less motivated to pay three weeks later.

Customers who aren’t on site

For a landlord, a property manager or a homeowner at work, the same pay link works from anywhere. They get the link, pay from their phone, and you get the notification. See invoicing for how pay-now links and automatic reminders work.

What your customer sees

The homeowner gets a short text with your business name, the amount and a secure link. They tap it, see the job total, choose to pay by card or Apple Pay, and get a receipt by text or email a few seconds later. There’s no app to download and no account to create, which is exactly why it gets paid on the spot instead of sitting on the kitchen counter.

Deposits before you buy materials

Large jobs shouldn’t start with you fronting the cost of materials. Collect a deposit by text when the customer signs the estimate, and the final balance when the work is done. Keep the signed estimate or scope of work with the payment, so both sides know exactly what the deposit covers and when the balance is due. Big deposits can trigger holds when a processor wasn’t told about them upfront. Here’s why processors hold contractor deposits and how to avoid it.

Large jobs, large fees, unless you use dual pricing

A $9,000 install paid by card costs real money to process, and on a tight bid that fee can eat a meaningful share of your profit. Dual pricing fixes that. Every invoice shows two totals: a lower cash price for check or ACH, and a card price that covers the cost of processing. The customer chooses how to pay, and when both prices are clearly shown on the estimate and invoice, it reads as a choice, not a penalty.

Every tech can collect, and the office stays in the loop

Each technician can take payment on a phone or a mobile reader. Payments are tied to the job and the tech, so end-of-day reconciliation stops being a guessing game, and nobody has to call the truck to ask whether a job was paid. If you already run field service software, tell us what you use and we’ll walk through how payments fit into it before you change anything.

What payment methods do contractors accept?

Most contractors take five kinds of payment:

  • Cards on site: customers tap, dip or swipe on a reader, or you type the card in. Best for service calls and small jobs.
  • Text-to-pay links: the homeowner pays from their phone after you leave. Best for remote customers and final balances.
  • ACH or eCheck: money comes straight from the customer’s bank and usually costs less on big jobs. It takes a few days to arrive.
  • Invoices with a pay button: a good fit for commercial and net-30 work.
  • Checks: still common, but slow, and they can bounce.

How much does credit card processing cost for contractors?

Your cost has three parts: the card network’s fee (called interchange), your processor’s markup, and any monthly fees. Typing in a card number usually costs more than tapping it, and on big tickets every tenth of a percent matters. Two ways to keep cost down: steer large jobs to ACH, or use dual pricing so customers who pay by card cover the card fee. Send us a statement and we’ll show you your real rate.

Apply for a contractor merchant account →

Match payment costs to the way you bill jobs

Compare the cost of deposits, final balances and remote payments using the same job values and payment methods. Check cancellation terms and any equipment commitments before changing providers. Our business payment processing overview explains pricing models, the guide to reading a merchant processing statement shows where recurring charges hide, and the text-to-pay guide for contractors compares invoice links, office reporting and payment confirmation.

HVAC, plumbing, roofing and electrical: what changes by trade

  • HVAC: lots of service calls, plus big replacement jobs where a deposit often comes first.
  • Plumbing: emergency calls where you want to get paid before you leave.
  • Roofing and remodeling: large deposits weeks before the work starts, which is when holds tend to happen.
  • Electrical: a mix of small service calls and large panel or rewiring jobs.

Switching without slowing down your jobs

We set up the readers, the pay links and dual pricing for you, test them before your crew goes out, and show your techs exactly what to tap and what to say if a customer asks about the card price. You keep working your schedule while we handle the paperwork. And when something goes wrong on a Saturday job, you call a person who answers, not a ticket queue.

Net-30 billing vs. paid on the jobsiteBill later, wait for a check• Invoice mailed after the job• Customer pays in 30 days or more• Office chases late payments• You float labor and materialsPaid before you leave✓ Pay link sent from the jobsite✓ Customer pays by card or bank✓ Automatic receipt and record✓ Cash in the bank next business day
Collecting at the job removes weeks of waiting.
Contractors & Home Services FAQ

Questions contractor owners ask us

Can my techs take payments in the field? +
Yes. Mobile readers and phone-based payments let each tech collect on site.
Does this work with my field service software? +
Tell us what you use and we’ll check how it connects.
Can I take deposits? +
Yes. Send a deposit invoice before materials are ordered.
Can I add dual pricing to invoices? +
Yes. Invoices can show both cash and card amounts.
Free statement audit

What does your business pay to get paid?

Send last month’s statement and get a line-by-line answer within 24 hours, free either way.

Get my free statement audit →Prefer to talk? (800) 962-5908 — yes, a person answers.